TEST
“To put to a procedure, reaction or reagent to identify or characterize a substance constituent or combination thereof.”
WHAT WE DO
Laboratory testing is one of our team’s longest running and most successful service offering. We offer small-scale product specification testing and large-scale system performance testing services to standardized methods. We also offer program development and testing services for non-standardized products. With an ISO/IEC 17025 accredited laboratory and over 25 years of experience under our belt, our Test Reports are accepted by code evaluation bodies and authorities that have jurisdiction throughout the world.
TOP REQUESTS
Test a product to its specific standardized/codified specification.
Develop a test program that will be acceptable to a specific Code entity.
Develop a test program to document performance of a product under predetermined conditions.
Our Laboratory Accreditation Scope
If you don’t see your needed standard, contact us.
Available Methods/Standards
Method/Standard: 502
Description:
Voluntary Specification for Field Testing of Newly Installed Fenestration Products
Method/Standard: 711
Description:
Voluntary Specification for Self Adhering Flashing Used for Installation of Exterior Wall Fenestration Products
Method/Standard: 800
Description:
Voluntary Specification and Test Methods For Sealants
Method/Standard: 127
Description:
Water Resistance: Hydrostatic Pressure Test
Method/Standard: T0004
Description:
Process for Approval of Air Barrier Materials, Components and Assemblies
Method/Standard: 4474
Description:
American National Standard for Evaluating the Wind Uplift Resistance of Roof Assemblies Using Static Positive and/or Negative Differential Pressures
Method/Standard: 4474(B) 2×2
Description:
American National Standard for Evaluating the Wind Uplift Resistance of Roof Assemblies Using Static Positive and/or Negative Differential Pressures
Method/Standard: 4474(C) 5×9
Description:
American National Standard for Evaluating the Wind Uplift Resistance of Roof Assemblies Using Static Positive and/or Negative Differential Pressures
Method/Standard: 4474(D) 12×24
Description:
American National Standard for Evaluating the Wind Uplift Resistance of Roof Assemblies Using Static Positive and/or Negative Differential Pressures
Method/Standard: C109
Description: Standard Test Method for Determine the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynameter Pull-Meter Method
Method/Standard: C1029
Description: Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
Method/Standard: C1167
Description: Standard Specification for Clay Roof Tiles
Method/Standard: C1177
Description: Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
Method/Standard: C1183
Description: Standard Test Method for Extrusion Rate of Elastomeric Sealants
Method/Standard: C1185
Description: Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
Method/Standard: C1186
Description: Standard Specification for Flat Non-Asbestos Fiber-Cement Sheets
Method/Standard: C120
Description: Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
Method/Standard: C121
Description: Standard Test Method for Water Absorption of Slate
Method/Standard: C1225
Description: Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
Method/Standard: C1246
Description: Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
Method/Standard: C1247
Description: Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes
Method/Standard: C1250
Description: Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
Method/Standard: C1264
Description: Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping., Handling, and Storage of Gypsum Panel Products
Method/Standard: C1278
Description: Standard Specification for Fiber-Reinforced Gypsum Panel
Method/Standard: C127
Description: Standard Specification for Fiber-Reinforced Gypsum Panel
Method/Standard: C1288
Description: Standard Specification for Fiber-Cement Interior Substrate Sheets
Method/Standard: C1289
Description: Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
Method/Standard: C1305
Description: Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
Method/Standard: C1306
Description: Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
Method/Standard: C1325
Description: Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
Method/Standard: C1375
Description: Standard Guide for Substrates Used in Testing Building Seals and Sealants
Method/Standard: C1396
Description: Standard Specification for Gypsum Board
Method/Standard: C1442
Description: Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
Method/Standard: C1492
Description: Standard Specification for Concrete Roof Tile
Method/Standard: C1519
Description: Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
Method/Standard: C1522
Description: Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
Method/Standard: C165
Description: Standard Test Method for Measuring Compressive Properties of Thermal Insulations
Method/Standard: C1763
Description: Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
Method/Standard: C203
Description: Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
Method/Standard: C209
Description: Standard Specifications for Cellulosic Fiber Insulating Board
Method/Standard: C217
Description: Standard Test Method for Weather Resistance of Slate
Method/Standard: C272
Description: Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
Method/Standard: C297
Description: Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
Method/Standard: C303
Description: Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
Method/Standard: C393
Description: Standard Test Method for Core Shear Properties of Sandwich Construction by Beam Flexure
Method/Standard: C406
Description: Standard Specification for Roofing Slate
Method/Standard: C473
Description: Standard Test Methods for Physical Testing of Gypsum Panel Products
Method/Standard: C501
Description: Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
Method/Standard: C510
Description: Standard Test Method for Staining and Color Change of Single-to Multicomponent Joint Sealants
Method/Standard: C550
Description: Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
Method/Standard: C578
Description: Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Method/Standard: C639
Description: Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
Method/Standard: C661
Description: Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
Method/Standard: C679
Description: Standard Test Method for Tack-Free of Elastomeric Sealants
Method/Standard: C719
Description: Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
Method/Standard: C728
Description: Standard Specification for Perlite Thermal Insulation Board
Method/Standard: C734
Description: Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
Method/Standard: C793
Description: Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
Method/Standard: C794
Description: Standard Test Method for Adhesion-in-Peel of Elastomeric Join Sealants
Method/Standard: C836
Description: Standard Specification for High Solid Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
Method/Standard: C920
Description: Standard Specification for Elastomeric Joint Sealants
Method/Standard: C947
Description: Standard Specification for Elastomeric Joint Sealants
Method/Standard: C957
Description: Standard Specification for High Solid Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Integral Wearing Surface
Method/Standard: D1004
Description: Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
Method/Standard: D1037
Description: Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
Method/Standard: D1204
Description: Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
Method/Standard: D146
Description: Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
Method/Standard: D1475
Description: Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
Method/Standard: D1622
Description: Standard Test Method for Apparent Density of Rigid Cellular Plastics
Method/Standard: D1623
Description: Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
Method/Standard: D1644
Description: Standard Test Methods for Nonvolatile Content of Vanishes
Method/Standard: D1653
Description: Standard Test Methods for Water Vapor Transmission of Organic Coating Films
Method/Standard: D1670
Description: Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
Method/Standard: D1790
Description: Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
Method/Standard: D1876
Description: Standard Test Method for Peel Resistance of Adhesives ( T-Peel Test)
Method/Standard: D1922
Description: Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
Method/Standard: D1970
Description: Standard Specification for Self-Adhering Polymer Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
Method/Standard: D2126
Description: Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
Method/Standard: D2136
Description: Standard Test Method for Coated Fabrics-Low Temperature Bend Test
Method/Standard: D2137
Description: Standard Test Method for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
Method/Standard: D2178
Description: Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
Method/Standard: D2196
Description: Standard Test Method for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
Method/Standard: D2240
Description: Standard Test Method for Rubber Property-Durometer Hardness
Method/Standard: D2247
Description: Standard Practice for Testing Water Resistance of Coating in 100% Relative Humidity
Method/Standard: D226
Description: Standard Specification for Asphalt Saturated Organic Felt Used in Roofing and Waterproofing
Method/Standard: D228
Description: Standard Test Methods for Sampling, Testing and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
Method/Standard: D2369
Description: Standard Test Method for Volatile Content of Coatings
Method/Standard: D2370
Description: Standard Test Method for Tensile Properties of Organic Coatings
Method/Standard: D2394
Description: Standard Test Methods for Simulated Service Testing of Wood and Wood Based Finish Flooring
Method/Standard: D2523
Description: Standard Practice for Testing Load-Strain Properties of Roofing Membranes
Method/Standard: D2565
Description: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
Method/Standard: D2626
Description: Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
Method/Standard: D2697
Description: Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
Method/Standard: D2824
Description: Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered without Asbestos
Method/Standard: D2842
Description: Standard Test Method for Water Absorption of Rigid Cellular Plastics
Method/Standard: D3019
Description: Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, and Fibered
Method/Standard: D3045
Description: Standard Specification for Flexible Poly (Vinyl Chloride) Plastic Sheeting for Pond, Canal, and Reservoir Lining
Method/Standard: D3330
Description: Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
Method/Standard: D3389
Description: Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
Method/Standard: D3462
Description: Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
Method/Standard: D36
Description: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
Method/Standard: D3767
Description: Standard Practice for Rubber-Measurement of Dimensions
Method/Standard: D3909
Description: Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules
Method/Standard: D4
Description: Standard Test Method for Bitumen Content
Method/Standard: D4073
Description: Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes
Method/Standard: D412
Description: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Method/Standard: D413
Description: Standard Test Methods for Rubber Property-Adhesion to Flexible Substrate
Method/Standard: D4226
Description: Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
Method/Standard: D4434
Description: Standard Specification for Poly (Vinyl Chloride) Sheet Roofing
Method/Standard: D4533
Description: Standard Test Method for Trapezoid Tearing Strength of Geotextiles
Method/Standard: D4601
Description: Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
Method/Standard: D4637
Description: Standard Specification for EPDM Sheet Used in Single-Ply Membrane
Method/Standard: D471
Description: Standard Test Method for Rubber Property-Effect of Liquids
Method/Standard: D4798
Description: Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
Method/Standard: D4799
Description: Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray and Condensation Method)
Method/Standard: D4869
Description: Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
Method/Standard: D4897
Description: Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
Method/Standard: D4977
Description: Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
Method/Standard: D5
Description: Standard Test Method for Penetration of Bituminous Materials
Method/Standard: D5019
Description: Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
Method/Standard: D5034
Description: Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
Method/Standard: D5035
Description: Standard Test for Breaking Force and Elongation of Textile Fabrics (Strip Method)
Method/Standard: D5147
Description: Standard Test Method for Sampling and Testing Modified Bituminous Sheet Material
Method/Standard: D5206
Description: Standard Test Method for Wind load Resistance of Rigid Plastic Siding
Method/Standard: D522
Description: Standard Tet Methods for Mandrel Band Test of Attached Organic Coatings
Method/Standard: D5385
Description: Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
Method/Standard: D5420
Description: Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
Method/Standard: D5602
Description: Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
Method/Standard: D562
Description: Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
Method/Standard: D5635
Description: Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
Method/Standard: D570
Description: Standard Test Method for Water Absorption of Plastics
Method/Standard: D573
Description: Standard Test Method for Rubber-Deterioration in an Air Oven
Method/Standard: D5869
Description: Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
Method/Standard: D6083
Description: Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
Method/Standard: D6162
Description: Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Material Using a Combination of Polyester and Glass Fiber Reinforcements
Method/Standard: D6163
Description: Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Material Using a Combination of Polyester and Glass Fiber Reinforcements
Method/Standard: D6164
Description: Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Material Using a Combination of Polyester Reinforcements
Method/Standard: D618
Description: Standard Practice for Conditioning Plastics for Testing
Method/Standard: D6222
Description: Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
Method/Standard: D6223
Description: Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
Method/Standard: D624
Description: Standards Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Method/Standard: D6298
Description: Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
Method/Standard: D638
Description: Standard Test Method for Tensile Properties of Plastics
Method/Standard: D6380
Description: Standard Specifications for Asphalt Roll Roofing (Organic Felt)
Method/Standard: D6509
Description: Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
Method/Standard: D6511
Description: Standard Test Methods for Solvent Bearing Bituminous Compounds
Method/Standard: D6694
Description: Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane
Method/Standard: D6754
Description: Standard Specification for Ketone Ethylene Ester Base Sheet Roofing
Method/Standard: D6878
Description: Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
Method/Standard: D6947
Description: Standard Specification for Liquid Applied Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing Systems
Method/Standard: D70
Description: Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
Method/Standard: D7051
Description: Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface
Method/Standard: D7349
Description: Standard Test method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
Method/Standard: D751
Description: Standard Test Methods for Coated Fabrics
Method/Standard: D7635
Description: Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
Method/Standard: D779
Description: Standard Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by the Dry Indicator Method
Method/Standard: D816
Description: Standard Test Methods for Rubber Cements
Method/Standard: D8257
Description: Standard Specification for Mechanically Attached Polymeric Roof Underlayment Used in Steep Slope Roofing
Method/Standard: D828
Description: Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of Elongation Apparatus
Method/Standard: D88
Description: Standard Test Method for Saybolt Viscosity
Method/Standard: D882
Description: Standard Test Method for Tensile Properties of Thin Plastic Sheeting
Method/Standard: D903
Description: Standard Test Method for Peel or Stripped Strength of Adhesive Bonds
Method/Standard: D92
Description: Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
Method/Standard: D93
Description: Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
Method/Standard: D95
Description: Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
Method/Standard: E1105
Description: Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, but Uniform or Cyclic Static Air Pressure Difference
Method/Standard: E1233
Description: Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
Method/Standard: E154
Description: Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls or as Ground Cover
Method/Standard: E1886
Description: Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Storm Shutters Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
Method/Standard: E1996
Description: Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
Method/Standard: E2178
Description: Standard Test Method for Air Permeance of Building Materials
Method/Standard: E2357
Description: Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
Method/Standard: E2556
Description: Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
Method/Standard: E283
Description: Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
Method/Standard: E330
Description: Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtian Walls but Uniform Static Air Pressure Difference
Method/Standard: E331
Description: Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
Method/Standard: E488
Description: Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements
Method/Standard: E547
Description: Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
Method/Standard: E907
Description: Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
Method/Standard: E96
Description: Standard Test Methods for Water Vapor Transmission of Materials
Method/Standard: F1087
Description: Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
Method/Standard: G151
Description: Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
Method/Standard: G154
Description: Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
Method/Standard: G155
Description: Standard Practice for Operating Xenon Arc Light Apparatus of Non-Metallic Materials
Method/Standard: ASTM-G26-1996-04
Description: Standard Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) with and Without Water for Exposure of Nonmetallic Materials
Description: Standard Test Method for Determine the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynameter Pull-Meter Method
Method/Standard: C1029
Description: Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
Method/Standard: C1167
Description: Standard Specification for Clay Roof Tiles
Method/Standard: C1177
Description: Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
Method/Standard: C1183
Description: Standard Test Method for Extrusion Rate of Elastomeric Sealants
Method/Standard: C1185
Description: Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
Method/Standard: C1186
Description: Standard Specification for Flat Non-Asbestos Fiber-Cement Sheets
Method/Standard: C120
Description: Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
Method/Standard: C121
Description: Standard Test Method for Water Absorption of Slate
Method/Standard: C1225
Description: Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
Method/Standard: C1246
Description: Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
Method/Standard: C1247
Description: Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes
Method/Standard: C1250
Description: Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
Method/Standard: C1264
Description: Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping., Handling, and Storage of Gypsum Panel Products
Method/Standard: C1278
Description: Standard Specification for Fiber-Reinforced Gypsum Panel
Method/Standard: C127
Description: Standard Specification for Fiber-Reinforced Gypsum Panel
Method/Standard: C1288
Description: Standard Specification for Fiber-Cement Interior Substrate Sheets
Method/Standard: C1289
Description: Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
Method/Standard: C1305
Description: Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
Method/Standard: C1306
Description: Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
Method/Standard: C1325
Description: Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
Method/Standard: C1375
Description: Standard Guide for Substrates Used in Testing Building Seals and Sealants
Method/Standard: C1396
Description: Standard Specification for Gypsum Board
Method/Standard: C1442
Description: Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
Method/Standard: C1492
Description: Standard Specification for Concrete Roof Tile
Method/Standard: C1519
Description: Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
Method/Standard: C1522
Description: Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
Method/Standard: C165
Description: Standard Test Method for Measuring Compressive Properties of Thermal Insulations
Method/Standard: C1763
Description: Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
Method/Standard: C203
Description: Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
Method/Standard: C209
Description: Standard Specifications for Cellulosic Fiber Insulating Board
Method/Standard: C217
Description: Standard Test Method for Weather Resistance of Slate
Method/Standard: C272
Description: Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
Method/Standard: C297
Description: Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
Method/Standard: C303
Description: Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
Method/Standard: C393
Description: Standard Test Method for Core Shear Properties of Sandwich Construction by Beam Flexure
Method/Standard: C406
Description: Standard Specification for Roofing Slate
Method/Standard: C473
Description: Standard Test Methods for Physical Testing of Gypsum Panel Products
Method/Standard: C501
Description: Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
Method/Standard: C510
Description: Standard Test Method for Staining and Color Change of Single-to Multicomponent Joint Sealants
Method/Standard: C550
Description: Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
Method/Standard: C578
Description: Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
Method/Standard: C639
Description: Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
Method/Standard: C661
Description: Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
Method/Standard: C679
Description: Standard Test Method for Tack-Free of Elastomeric Sealants
Method/Standard: C719
Description: Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
Method/Standard: C728
Description: Standard Specification for Perlite Thermal Insulation Board
Method/Standard: C734
Description: Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
Method/Standard: C793
Description: Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
Method/Standard: C794
Description: Standard Test Method for Adhesion-in-Peel of Elastomeric Join Sealants
Method/Standard: C836
Description: Standard Specification for High Solid Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
Method/Standard: C920
Description: Standard Specification for Elastomeric Joint Sealants
Method/Standard: C947
Description: Standard Specification for Elastomeric Joint Sealants
Method/Standard: C957
Description: Standard Specification for High Solid Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Integral Wearing Surface
Method/Standard: D1004
Description: Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
Method/Standard: D1037
Description: Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
Method/Standard: D1204
Description: Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
Method/Standard: D146
Description: Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
Method/Standard: D1475
Description: Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
Method/Standard: D1622
Description: Standard Test Method for Apparent Density of Rigid Cellular Plastics
Method/Standard: D1623
Description: Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
Method/Standard: D1644
Description: Standard Test Methods for Nonvolatile Content of Vanishes
Method/Standard: D1653
Description: Standard Test Methods for Water Vapor Transmission of Organic Coating Films
Method/Standard: D1670
Description: Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
Method/Standard: D1790
Description: Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
Method/Standard: D1876
Description: Standard Test Method for Peel Resistance of Adhesives ( T-Peel Test)
Method/Standard: D1922
Description: Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
Method/Standard: D1970
Description: Standard Specification for Self-Adhering Polymer Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
Method/Standard: D2126
Description: Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
Method/Standard: D2136
Description: Standard Test Method for Coated Fabrics-Low Temperature Bend Test
Method/Standard: D2137
Description: Standard Test Method for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
Method/Standard: D2178
Description: Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
Method/Standard: D2196
Description: Standard Test Method for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
Method/Standard: D2240
Description: Standard Test Method for Rubber Property-Durometer Hardness
Method/Standard: D2247
Description: Standard Practice for Testing Water Resistance of Coating in 100% Relative Humidity
Method/Standard: D226
Description: Standard Specification for Asphalt Saturated Organic Felt Used in Roofing and Waterproofing
Method/Standard: D228
Description: Standard Test Methods for Sampling, Testing and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
Method/Standard: D2369
Description: Standard Test Method for Volatile Content of Coatings
Method/Standard: D2370
Description: Standard Test Method for Tensile Properties of Organic Coatings
Method/Standard: D2394
Description: Standard Test Methods for Simulated Service Testing of Wood and Wood Based Finish Flooring
Method/Standard: D2523
Description: Standard Practice for Testing Load-Strain Properties of Roofing Membranes
Method/Standard: D2565
Description: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
Method/Standard: D2626
Description: Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
Method/Standard: D2697
Description: Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
Method/Standard: D2824
Description: Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered without Asbestos
Method/Standard: D2842
Description: Standard Test Method for Water Absorption of Rigid Cellular Plastics
Method/Standard: D3019
Description: Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, and Fibered
Method/Standard: D3045
Description: Standard Specification for Flexible Poly (Vinyl Chloride) Plastic Sheeting for Pond, Canal, and Reservoir Lining
Method/Standard: D3330
Description: Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
Method/Standard: D3389
Description: Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
Method/Standard: D3462
Description: Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
Method/Standard: D36
Description: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
Method/Standard: D3767
Description: Standard Practice for Rubber-Measurement of Dimensions
Method/Standard: D3909
Description: Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules
Method/Standard: D4
Description: Standard Test Method for Bitumen Content
Method/Standard: D4073
Description: Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes
Method/Standard: D412
Description: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Method/Standard: D413
Description: Standard Test Methods for Rubber Property-Adhesion to Flexible Substrate
Method/Standard: D4226
Description: Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
Method/Standard: D4434
Description: Standard Specification for Poly (Vinyl Chloride) Sheet Roofing
Method/Standard: D4533
Description: Standard Test Method for Trapezoid Tearing Strength of Geotextiles
Method/Standard: D4601
Description: Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
Method/Standard: D4637
Description: Standard Specification for EPDM Sheet Used in Single-Ply Membrane
Method/Standard: D471
Description: Standard Test Method for Rubber Property-Effect of Liquids
Method/Standard: D4798
Description: Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
Method/Standard: D4799
Description: Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray and Condensation Method)
Method/Standard: D4869
Description: Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
Method/Standard: D4897
Description: Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
Method/Standard: D4977
Description: Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
Method/Standard: D5
Description: Standard Test Method for Penetration of Bituminous Materials
Method/Standard: D5019
Description: Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
Method/Standard: D5034
Description: Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
Method/Standard: D5035
Description: Standard Test for Breaking Force and Elongation of Textile Fabrics (Strip Method)
Method/Standard: D5147
Description: Standard Test Method for Sampling and Testing Modified Bituminous Sheet Material
Method/Standard: D5206
Description: Standard Test Method for Wind load Resistance of Rigid Plastic Siding
Method/Standard: D522
Description: Standard Tet Methods for Mandrel Band Test of Attached Organic Coatings
Method/Standard: D5385
Description: Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
Method/Standard: D5420
Description: Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
Method/Standard: D5602
Description: Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
Method/Standard: D562
Description: Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
Method/Standard: D5635
Description: Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
Method/Standard: D570
Description: Standard Test Method for Water Absorption of Plastics
Method/Standard: D573
Description: Standard Test Method for Rubber-Deterioration in an Air Oven
Method/Standard: D5869
Description: Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
Method/Standard: D6083
Description: Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
Method/Standard: D6162
Description: Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Material Using a Combination of Polyester and Glass Fiber Reinforcements
Method/Standard: D6163
Description: Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Material Using a Combination of Polyester and Glass Fiber Reinforcements
Method/Standard: D6164
Description: Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Material Using a Combination of Polyester Reinforcements
Method/Standard: D618
Description: Standard Practice for Conditioning Plastics for Testing
Method/Standard: D6222
Description: Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
Method/Standard: D6223
Description: Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
Method/Standard: D624
Description: Standards Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Method/Standard: D6298
Description: Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
Method/Standard: D638
Description: Standard Test Method for Tensile Properties of Plastics
Method/Standard: D6380
Description: Standard Specifications for Asphalt Roll Roofing (Organic Felt)
Method/Standard: D6509
Description: Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
Method/Standard: D6511
Description: Standard Test Methods for Solvent Bearing Bituminous Compounds
Method/Standard: D6694
Description: Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane
Method/Standard: D6754
Description: Standard Specification for Ketone Ethylene Ester Base Sheet Roofing
Method/Standard: D6878
Description: Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
Method/Standard: D6947
Description: Standard Specification for Liquid Applied Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing Systems
Method/Standard: D70
Description: Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method)
Method/Standard: D7051
Description: Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface
Method/Standard: D7349
Description: Standard Test method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
Method/Standard: D751
Description: Standard Test Methods for Coated Fabrics
Method/Standard: D7635
Description: Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
Method/Standard: D779
Description: Standard Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by the Dry Indicator Method
Method/Standard: D816
Description: Standard Test Methods for Rubber Cements
Method/Standard: D8257
Description: Standard Specification for Mechanically Attached Polymeric Roof Underlayment Used in Steep Slope Roofing
Method/Standard: D828
Description: Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of Elongation Apparatus
Method/Standard: D88
Description: Standard Test Method for Saybolt Viscosity
Method/Standard: D882
Description: Standard Test Method for Tensile Properties of Thin Plastic Sheeting
Method/Standard: D903
Description: Standard Test Method for Peel or Stripped Strength of Adhesive Bonds
Method/Standard: D92
Description: Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
Method/Standard: D93
Description: Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
Method/Standard: D95
Description: Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
Method/Standard: E1105
Description: Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, but Uniform or Cyclic Static Air Pressure Difference
Method/Standard: E1233
Description: Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
Method/Standard: E154
Description: Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls or as Ground Cover
Method/Standard: E1886
Description: Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Storm Shutters Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
Method/Standard: E1996
Description: Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
Method/Standard: E2178
Description: Standard Test Method for Air Permeance of Building Materials
Method/Standard: E2357
Description: Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
Method/Standard: E2556
Description: Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
Method/Standard: E283
Description: Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
Method/Standard: E330
Description: Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtian Walls but Uniform Static Air Pressure Difference
Method/Standard: E331
Description: Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
Method/Standard: E488
Description: Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements
Method/Standard: E547
Description: Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
Method/Standard: E907
Description: Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
Method/Standard: E96
Description: Standard Test Methods for Water Vapor Transmission of Materials
Method/Standard: F1087
Description: Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
Method/Standard: G151
Description: Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
Method/Standard: G154
Description: Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
Method/Standard: G155
Description: Standard Practice for Operating Xenon Arc Light Apparatus of Non-Metallic Materials
Method/Standard: ASTM-G26-1996-04
Description: Standard Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) with and Without Water for Exposure of Nonmetallic Materials
Method/Standard: 37.54-95
Description:
Polyvinyl Chloride Roofing and Waterproofing Membrane
Method/Standard: A123.21
Description:
Standard test method for the dynamic wind uplift resistance of membrane-roofing systems
Method/Standard: TAS 101
Description: Test Procedue for Wind and Wind Driven Rain resistance of Discontinuous Roof Systems
Method/Standard: TAS 102
Description: Test Procedure for Static Uplift Resistance of Mechanically Attached, Rigid Roof Systems
Method/Standard: TAS 102(A)
Description: Test Procedure for Static Uplift Resistance of Mechanically Attached, Rigid Roof Systems
Method/Standard: TAS 103
Description: Test Procedure for Self-Adhered Underlayments for Use in Discontinuous Roof Systems
Method/Standard: TAS 104
Description: Test Procedure for Nail-on Underlayment for Use in Discontinuous Roof Systems
Method/Standard: TAS 105
Description: Test Procedure for Field Withdrawal Resistance Testing
Method/Standard: TAS 110
Description: Testing Requirements for Physical Properties of Roof Membranes, Insulation, Coatings, and Other Roofing Components
Method/Standard: TAS 114
Description: Test Procedures for Roof System Assemblies in the High-Velocity Hurricane Zone Jurisdiction
Method/Standard: TAS 114(A)
Description: Test Procedure for Above Deck Combustibility
Method/Standard: TAS 114(B)
Description: Test Procedure for Simulated Dynamic Uplift Pressure Resistance of Mechanically Attached Roofing Assemblies
Method/Standard: TAS 114(C)
Description: Test Procedure for Simulated Uplift Pressure Resistance of Roofing Assemblies (5 x 9)
Method/Standard: TAS 114(D)
Description: Test Procedure for Simulated Uplift Pressure Resistance of Adhered Roofing Assemblies (2 x 2)
Method/Standard: TAS 114(E)
Description: Test Procedure for Corrosion Resistance of Fasteners, Batten Bars and Stress Distribution Plates
Method/Standard: TAS 114(F)
Description: Test Procedure for Susceptibility to Hail Damage for Roofing Systems
Method/Standard: TAS 114(G)
Description: Test Procedure for Susceptibility to Leakage for Roofing Systems
Method/Standard: TAS 114(H)
Description: Test Procedures for Small Scale QC amd Physical Properties of Approved Roofing Systems
Method/Standard: TAS 114(I)
Description: Test Procedure for Static and Dynamic Puncture Resistance of Roofing Assemblies
Method/Standard: TAS 114(J)
Description: Test Procedure for 12 x 24 Simulated Uplift Pressure Resistance of Roofing Assemblies
Method/Standard: TAS 117
Description: Test Procedure for Withdrawal Resistance Testing of Mechanical Fasteners Used in Roof System Assemblies
Method/Standard: TAS 117(A)
Description: Test Procedure for Withdrawal Resistance Testing of Mechanical Fasteners Used in Roof System Assemblies
Method/Standard: TAS 117(B)
Description: Test Procedure for Dynamic Pull-Through Performance of Roofing Membranes over Fastener Heads or Fasteners with Metal Bearing Plates
Method/Standard: TAS 117(C)
Description: Test Procedure for Dynamic Pull-Off Performance of Roofing Fastener Heads or Fasteners with Bearing Plates
Method/Standard: TAS 124
Description: Test Procedure for Field Uplift Resistance Testing of Existing Membrane Roof Systems and In Situ Testing for Reroof and New Construction Applications
Method/Standard: TAS 201
Description: Impact Test Procedures
Method/Standard: TAS 202
Description: Criteria for Testing Impact and Non Impact Resistant Building Envelope Components Using Uniform Static Air Pressure
Method/Standard: TAS 203
Description: Criteria for Testing Products Subject to Cyclic Wind Pressure Loading
Description: Test Procedue for Wind and Wind Driven Rain resistance of Discontinuous Roof Systems
Method/Standard: TAS 102
Description: Test Procedure for Static Uplift Resistance of Mechanically Attached, Rigid Roof Systems
Method/Standard: TAS 102(A)
Description: Test Procedure for Static Uplift Resistance of Mechanically Attached, Rigid Roof Systems
Method/Standard: TAS 103
Description: Test Procedure for Self-Adhered Underlayments for Use in Discontinuous Roof Systems
Method/Standard: TAS 104
Description: Test Procedure for Nail-on Underlayment for Use in Discontinuous Roof Systems
Method/Standard: TAS 105
Description: Test Procedure for Field Withdrawal Resistance Testing
Method/Standard: TAS 110
Description: Testing Requirements for Physical Properties of Roof Membranes, Insulation, Coatings, and Other Roofing Components
Method/Standard: TAS 114
Description: Test Procedures for Roof System Assemblies in the High-Velocity Hurricane Zone Jurisdiction
Method/Standard: TAS 114(A)
Description: Test Procedure for Above Deck Combustibility
Method/Standard: TAS 114(B)
Description: Test Procedure for Simulated Dynamic Uplift Pressure Resistance of Mechanically Attached Roofing Assemblies
Method/Standard: TAS 114(C)
Description: Test Procedure for Simulated Uplift Pressure Resistance of Roofing Assemblies (5 x 9)
Method/Standard: TAS 114(D)
Description: Test Procedure for Simulated Uplift Pressure Resistance of Adhered Roofing Assemblies (2 x 2)
Method/Standard: TAS 114(E)
Description: Test Procedure for Corrosion Resistance of Fasteners, Batten Bars and Stress Distribution Plates
Method/Standard: TAS 114(F)
Description: Test Procedure for Susceptibility to Hail Damage for Roofing Systems
Method/Standard: TAS 114(G)
Description: Test Procedure for Susceptibility to Leakage for Roofing Systems
Method/Standard: TAS 114(H)
Description: Test Procedures for Small Scale QC amd Physical Properties of Approved Roofing Systems
Method/Standard: TAS 114(I)
Description: Test Procedure for Static and Dynamic Puncture Resistance of Roofing Assemblies
Method/Standard: TAS 114(J)
Description: Test Procedure for 12 x 24 Simulated Uplift Pressure Resistance of Roofing Assemblies
Method/Standard: TAS 117
Description: Test Procedure for Withdrawal Resistance Testing of Mechanical Fasteners Used in Roof System Assemblies
Method/Standard: TAS 117(A)
Description: Test Procedure for Withdrawal Resistance Testing of Mechanical Fasteners Used in Roof System Assemblies
Method/Standard: TAS 117(B)
Description: Test Procedure for Dynamic Pull-Through Performance of Roofing Membranes over Fastener Heads or Fasteners with Metal Bearing Plates
Method/Standard: TAS 117(C)
Description: Test Procedure for Dynamic Pull-Off Performance of Roofing Fastener Heads or Fasteners with Bearing Plates
Method/Standard: TAS 124
Description: Test Procedure for Field Uplift Resistance Testing of Existing Membrane Roof Systems and In Situ Testing for Reroof and New Construction Applications
Method/Standard: TAS 201
Description: Impact Test Procedures
Method/Standard: TAS 202
Description: Criteria for Testing Impact and Non Impact Resistant Building Envelope Components Using Uniform Static Air Pressure
Method/Standard: TAS 203
Description: Criteria for Testing Products Subject to Cyclic Wind Pressure Loading
Method/Standard: 4454
Description:
Approval Standard for Lightweight Insulating Concrete Roof Deck
Method/Standard: 4470
Description:
Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC500
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC48
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC148
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC152
Description: Test Method for Determining the Foot Traffic Resistance of Roof Coverings
Method/Standard: AC160
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: ES AC165
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC180
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC188
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC209
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC212
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC24
Description: Approval Standard Class 1 Roof Covers
Method/Standard: AC38
Description: Acceptance Criteria for Water-Resistive Barriers
Method/Standard: AC75
Description: Acceptance Criteria for Membrane Roof-Covering Systems
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC48
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC148
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC152
Description: Test Method for Determining the Foot Traffic Resistance of Roof Coverings
Method/Standard: AC160
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: ES AC165
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC180
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC188
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC209
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC212
Description: Approval Standard for Single-Ply, Polymer-Modified Bitumen Sheet, Built-Up roof (BUR) and Liquid Applied Roof Assemblies for use in Class 1 and Noncombustible Roof Deck Construction
Method/Standard: AC24
Description: Approval Standard Class 1 Roof Covers
Method/Standard: AC38
Description: Acceptance Criteria for Water-Resistive Barriers
Method/Standard: AC75
Description: Acceptance Criteria for Membrane Roof-Covering Systems
Method/Standard: 2578
Description:
Plastics — Determination of time-temperature limits after prolonged exposure to heat
Method/Standard: SSTD 11
Description:
Test Standard for Determining Wind Resistance of Concrete or Clay Roof Tiles
Method/Standard: T 410
Description:
Grammage of paper and paperboard (weight per unit area)
Method/Standard: 1897
Description:
Standard for Safety for Uplift Tests for Roof Covering Systems
Accreditation
Audited Facility Under ISO/IEC 17025
About Our Accreditation
The international accreditation standard for laboratory testing services is ISO/IEC 17025.
NEMO ETC facilities are audited and accredited by the following entities:
By virtue of these accreditations, our laboratory are listed and Approved with the following organizations.
In addition, our laboratory are participants in the UL Third-Party Test Data Program (TPTDP), whereby test data generated at our laboratory is acceptable for the establishment of UL Certification Listings.
About IAS
Our primary accreditation is through the International Accreditation Service (IAS); a non-profit, public-benefit corporation that help organizations demonstrate compliance and competence to their customers, regulators and the public. IAS accredits a wide range of companies and organizations involved in conformity assessment activities such as testing, inspection, certification, fabrication, code compliance and enforcement.
Nemo|etc. utilizes IAS as its primary accreditation body due, in part, to IAS being a signatory to the Asia Pacific Accreditation Cooperation and the ILAC Mutual Recognition Arrangement (ILAC MRA).
This allows Code bodies, government agencies and designers-of-record throughout the world to accept Nemo|etc. as an ISO/IEC accredited inspection agency and laboratory; and in turn, accept Nemo|etc. reports. For example:
- The Canadian Construction Materials Centre (CCMC) publishes Code evaluation reports for compliance with the National Building Code of Canada. CCMC requires testing performed by “laboratories recognized by CCMC for that particular test method”. The CCMC website indicates CCMC will recognize “laboratories accredited by the Standards Council of Canada (SCC)”. Since both IAS and SCC are signatories to the ILAC MRA, SCC recognizes IAS accredited laboratories and, therefore, recognizes NEMO ETC’s laboratory. By extension, CCMC must recognize Nemo|etc. testing for use in their CCMC reports.
Nemo|etc. laboratory are ISO/IEC accredited to conduct a wide variety of standardized tests from various publishers, including but not limited to:
- AAMA: American Architectural Manufacturers Association
- ANSI: American National Standards Institute
- ASTM: American Society of Testing and Materials
- CGSB: Canadian General Standards Board
- CSA: Canadian Standards Association
- FBC HVHZ TAS: Testing Application Standards (Miami-Dade Test Protocols)
- FM: FM Approvals, LLC
- SBCCI: Southern Building Code Congress International
- UBC: Uniform Building Code
- UL: Underwriters Laboratories
Our Process
How We Get You There
Submit test request or discuss test program objectives.
Determine accreditation requirements and sampling requirements for intended audience.
Nemo|etc. drafts the initial Services Agreement or Scope of Work for approval by both parties.
Nemo|etc. submits a request for materials to the customer.
Customer completes materials manufacturing declaration form.
Customer coordinates material sampling (with Nemo|etc. or 3rd party) and/or shipment of materials to lab.
Customer receives project schedule from Nemo|etc. project administrator.
Customer receives project updates and notifications of failure (if applicable) through the project administrator.
Customer receives, reviews and approves draft report.
Customer receives final report.
FAQ'S
Yes. Provided we have the equipment and expertise to conduct your needed test(s), and if accreditation is required for your intended audience, we can have the the standard(s) added to our scope by our primary accreditation body, IAS.
While this is not required, many intended audiences for your report require the laboratory document where the test materials were produced. If the test material is not randomly sampled or you do not supply the declaration, we will state “contact named client” within our report in regards to the production location.
Our clients are notified of failures as soon as possible after the failure is recorded. We review the data with you to determine if a re-test is prudent, and then take directive from you as to whether to continue the project, put the project on hold, or cancel the project.
No. The laboratory testing would need to be combined with inspection/QA services to facilitate product Certification. Visit www.nemocert.com to learn more about product certification services.
We’re Here to Help You
Our team is looking forward to meeting your highest expectation.